Siemens SIWAREX WL270 CP-S SA 사용 설명서 - 페이지 25

{카테고리_이름} Siemens SIWAREX WL270 CP-S SA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIWAREX WL270 CP-S SA 38 페이지. Mounting plates cp-s sa
Siemens SIWAREX WL270 CP-S SA에 대해서도 마찬가지입니다: 사용 설명서 (40 페이지)

페이지 인쇄
Siemens SIWAREX WL270 CP-S SA 사용 설명서
Procedure
Figure 5-4
1. Grease the bearing surfaces ① of the load cell with a bearing lubricant.
2. Insert the load cell into the mounting plates together with the pressure pieces.
3. Lower the load bearing implement onto the load cells.
5.2.6

Checking the installation

CAUTION
Destruction of the load cell, pressure piece set and mounting plates
Check that the load cell, pressure piece set and mounting plates are installed correctly, e.g.
by checking the mounting dimensions and oscillation distances. Incorrect assembly can
lead to the destruction of the load cell and the pressure piece set.
1. Check the installation of the load cell:
CP-S SA
Operating Instructions, 04/2009, A5E02522341B
Installing the load cell and pressure pieces
– The load bearing implement must be able to oscillate freely.
– The load cell should be aligned as vertically as possible.
Installation
5.2 Installing mounting plates
25