Siemens ULTRAMAT 6F 사용 설명서 - 페이지 43
{카테고리_이름} Siemens ULTRAMAT 6F에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens ULTRAMAT 6F 49 페이지. Gas analyzer for the determination of ir-absorbing gases
Siemens ULTRAMAT 6F에 대해서도 마찬가지입니다: 추가 장비 매뉴얼 (20 페이지), 안전 매뉴얼 (24 페이지)
페이지 인쇄
Assignment of restricted breathing enclosure nR
Ignition protection type
Temperature class *)
Explosion group
*) Assuming that the doors of the enclosure are opened at the earliest 10 minutes after switching off the power.
Assignment of dust protection by enclosure Ex tD for Zone 22
Ignition protection type
Temperature class *)
Explosion group
*) Assuming that the doors of the enclosure are opened at the earliest 10 minutes after switching off the power.
Electric connection data
Electric connection data
Power supply
Analog output
Tightening torque M
Relay outputs (6 changeover contacts)
Serial port
PROFIBUS PA interface (option)
(9-pin DSUB connector, pins 3, 7, 8)
(not for CALOMAT 62F)
Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
A5E45779389002-01, 09/2018
Restricted breathing enclosure Ex nR
•
7MB201x–xxx0x–0xxx- or -1xxx-Z+E11 and
7MB211x–xxxxx–0xAx- or -1xAx-Z+E11, 7MB253x–xxxxx–xxBx)
Device
OXYMAT 6F, unheated
OXYMAT 6F, heated
ULTRAMAT 6F
CALOMAT 6F
CALOMAT 62F
IIC
Dust protection by enclosure Ex tD for Zone 22
•
xAGx, 7MB201x–xxx0x–0xxx- or -1xxx-Z+E40 and
7MB211x–xxxxx–0xAx- or -1xAx-Z+E40, 7MB253x–xxxxx–xxGx)
Device
OXYMAT 6F, unheated
OXYMAT 6F, heated
ULTRAMAT 6F, unheated
ULTRAMAT 6F, heated
CALOMAT 6F
CALOMAT 62F
IIC
All analyzers, all types of protection, if not specified otherwise
100 ... 120 V AC, 48 ... 63 Hz or
210 ... 240 V AC, 48 ... 63 Hz,
U
= 264 V AC
m
0/2 (4 ... 20 mA, potential-free, load: 750 Ω,
optionally with type of protection "Intrinsic safety Ex ia IIC/IIB
or Ex ib IIC/IIB"
in accordance with the test certificate of the associated equipment
M 20 cable gland: M = 3.8 ± 0.2 Nm
24 V, 1 A AC or 1 A DC
RS 485
Optionally with type of protection "Intrinsic safety Ex ia IIC/IIB or Ex ib IIC/IIB
Only for connection to a certified intrinsically-safe circuit with the following
maximum values:
Effective internal inductance L
Effective internal capacitance: C
FISCO power supply
U
= 17.5 V
0
I
= 380 mA
0
P
= 5.32 W
0
:
(Analyzer versions 7MB251x-xxx0x-xABx,
Ex nR
T6
T4
T6
T6
T6
:
(Analyzer versions 7MB251x-xxx0x-
Ex tD (Zone 22)
T60 °C
T130 °C
T65 °C
T82 °C
T65 °C
T65 °C
: 8 μH
i
: negligibly small (<1 nF)
i
Linear barrier
U
= 24 V
0
I
= 250 mA
0
P
= 1.2 W
0
43