Digital Finishing Group TitanWire 운영 매뉴얼 - 페이지 3

{카테고리_이름} Digital Finishing Group TitanWire에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Finishing Group TitanWire 5 페이지. Heavy duty wire punch and binding machine

페이지 인쇄

TitanWire Machine Operation Manual

Dear Customer,

Thank you for purchasing our TitanWire machine. The following are basic installation

and operation instructions. For advanced binding instructions, please contact DFG.

Determine metal wire binding element size

There are two methods you can use: (ETitanCoil machine shown)

1. Use coil that is 2-3 mm (1/8" ) larger than book thickness

2. Use our coil size selector. Refer to picture (ETitanCoil machine shown)

1260 Kempar, Madison Heights, MI 48071, U.S.A. Phone: 248-733-0400, Fax: 775-587-5352

Email: [email protected] Website: www.dfgus.com

Installation

1. Install punching handle and binding handle

2. Install the screws to lock the handles

Put book on machine base, under the

"Size Selector". Move the "Size

Selector" down until its bottom

touches the top sheets of the book.

The top of the "Size Selector" will

point to a wire size on the scale you

can use