Digital Finishing Group TitanWire 운영 매뉴얼 - 페이지 4

{카테고리_이름} Digital Finishing Group TitanWire에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Finishing Group TitanWire 5 페이지. Heavy duty wire punch and binding machine

페이지 인쇄

Determine Side Margin (side guide) and Punch Margin (back gauge)

Punching

1. Align sheets and insert edge to be bound into punch throat

2. Push the sheets flush against the inner back wall of the punch throat

3. Slide the sheets leftward, against the side guide

4. Pull the punch handle to punch

You can punch up to 28 sheets of paper (20 lb. paper) at once.

Most people punch between 12 and 20 sheets at a time.

Binding

1260 Kempar, Madison Heights, MI 48071, U.S.A. Phone: 248-733-0400, Fax: 775-587-5352

Email: [email protected] Website: www.dfgus.com

Set closing mechanism measurements, test wire closure, and

adjust to satisfactory close.

1. Select the punch margin (general

guideline: the thicker the book, the

larger the ideal punch margin.

However, you can use small punch

margins for any book thickness)

2. Set side guide to center the sheet