Cisco WS-X5168 매뉴얼 - 페이지 28

{카테고리_이름} Cisco WS-X5168에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco WS-X5168 33 페이지. Configuring token ring lan emulation
Cisco WS-X5168에 대해서도 마찬가지입니다: 제품 지원 게시판 (6 페이지)

페이지 인쇄
Cisco WS-X5168 매뉴얼

Token Ring LANE Configuration Example

Command
Router#
[subinterface-number
] |
] [
Router#
Router#
]
Router#
[subinterface-number
] |
]
Router#
[subinterface-number
] |
] [
Note
For descriptions of the output displayed by the commands listed above, see the description of the command
documented in the Cisco IOS Switching Services Command Reference .
Token Ring LANE Configuration Example
This section provides a configuration example composed of two Catalyst 5000 series switches and a Cisco
LightStream 1010 ATM switch as shown in the figure below.
Figure 1
•
•
•
28
show lane client
interface atm 0
[
name
elan-name
brief
]
show lane config
interface atm 0
[
show lane database
show lane le-arp
interface atm 0
[
name
elan-name
show lane server
interface atm 0
[
name
elan-name
brief
]
LES/BUS and LECS Configuration
Example Assumptions, page 29
Configuring the TrCRF Example, page 29
Configuring the LES BUS and the LEC Example, page 30
Purpose
Displays the global and per-VCC LANE
information for all LECs configured on any
subinterface or ELAN.
Displays the global and per-VCC LANE
]
information for the LECS configured on any
interface.
Displays the LECS database.
[database-name
Displays the LE_ARP table of the LECs configured
on the specified subinterface or ELAN.
Displays the global and per-VCC LANE
information for the LES configured on a specified
subinterface or ELAN.
Monitoring and Maintaining LANE Components