Samsung 2232BW - SyncMaster - 22" LCD Monitor 빠른 시작 매뉴얼 - 페이지 10

{카테고리_이름} Samsung 2232BW - SyncMaster - 22" LCD Monitor에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 2232BW - SyncMaster - 22" LCD Monitor 12 페이지. Quick guide (easy manual) (ver.1.0) (spanish)
Samsung 2232BW - SyncMaster - 22" LCD Monitor에 대해서도 마찬가지입니다: 사양 (2 페이지), (스페인어) 매뉴얼 델 유저리오 (47 페이지), (빠른 시작 가이드 (12 페이지)

페이지 인쇄
reads
See the video card
"Unrecognized
manual to see if the
monitor, Plug &
Plug & Play (VESA
Play (VESA DDC)
DDC) function can
monitor found".
be supported.
Check when
MagicTune™
MagicTune™ does
feature is found only
not function
on PC (VGA) with
properly.
Window OS that
supports Plug and
Play.
MagicTune™
Have you changed
doesn't work
your PC or video
properly.
graphic card?
Did you install the
program?
Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.
Check the following items if there is trouble with the monitor.
Check if the power cord and the video cables are properly connected to the computer.
Check if the computer beeps more than 3 times when booting.
(If it does, ask the service center to check the main board of the computer.)
If you installed a new video card or if you assembled the PC, check if the installed the adapter(video)
driver and the monitor driver.
Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz.
(Do not exceed 75 Hz when using the maximum resolution.)
If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove
the Display Adapter at the "Control Panel → System → Device Administrator" and then reboot the
computer to reinstall the adapter (video) driver.
If problems repeatedly occur,
Q & A
Question
How can I change the frequency?
How can I adjust the resolution?
Install the monitor driver according to the
Installation
Instructions.
* To check whether your PC is available for MagicTune™
feature, follow the steps below (When Windows is XP);
Control Panel → Performance and Maintenance →
System → Hardware → Device Manager → Monitors →
After deleting Plug and Play monitor, find 'Plug and Play
monitor' by searching new Hardware.
MagicTune™ is an additional software for the monitor.
Some graphic cards may not support your monitor. When
you have a problem with the graphic card, visit our
website to check the compatible graphic card list
provided.
http://www.samsung.com/monitor/magictune
Download the latest program. The program can be
downloaded
Reboot the computer after installing the program for the
first time. If a copy of the program is already installed,
remove it, reboot the computer, and then install the
program again. You need to reboot the computer for it to
operate normally after installing or removing the program.
contact an authorized service
The frequency can be changed by reconfiguring the
video card.
Note that video card support can vary, depending on
the version of the driver used.
(Refer to the computer or the video card manual for
details.)
Windows XP :
Set the resolution in the Control Panel →
Appearance and Themes → Display → Settings.
http://www.samsung.com/monitor/magictune
center.
Answer
Driver