Samsung 2232BW - SyncMaster - 22" LCD Monitor 빠른 시작 매뉴얼 - 페이지 9
{카테고리_이름} Samsung 2232BW - SyncMaster - 22" LCD Monitor에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 2232BW - SyncMaster - 22" LCD Monitor 12 페이지. Quick guide (easy manual) (ver.1.0) (spanish)
Samsung 2232BW - SyncMaster - 22" LCD Monitor에 대해서도 마찬가지입니다: 사양 (2 페이지), (스페인어) 매뉴얼 델 유저리오 (47 페이지), (빠른 시작 가이드 (12 페이지)
페이지 인쇄indicator on the
monitor blinking at 1
second intervals?
Connected using
the DVI cable?
I cannot see the
Have you locked
On Screen
the On Screen
Display.
Display (OSD)
Menu to prevent
changes?
The screen shows
Is the screen
strange colors or
displaying only one
just black and
color as if looking at
white.
the screen through
a cellophane
paper?
Have the screen
colors become
strange after
running a program
or due to a crash
between
applications?
Has the video card
been set properly?
The screen
Have you changed
suddenly has
the video card or
become
the driver?
unbalanced.
Have you adjusted
the resolution or
frequency to the
monitor?
The screen can be unbalanced due to the cycle of the video card signals.
Readjust Position by referring to the OSD.
The screen is out
Have you adjusted
of focus or OSD
the resolution or
cannot be
frequency on the
adjusted.
monitor?
LED is blinking but
Is the frequency
no images on the
properly adjusted
screen.
when checking the
Display Timing on
the menu?
There are only 16
Have the Windows
colors shown on
colors been set
the screen. The
properly?
screen colors have
changed after
changing the video
card.
Has the video card
been set properly?
There is a
Have you installed
message that
the monitor driver?
restore the image on the screen.
If there is still no image, press the 'SOURCE/ ' button.
Then press any key on the keyboard again to activate the
monitor and restore the image on the screen.
You may get a blank screen if you boot the system
before you connect the DVI cable, or disconnect and then
reconnect the DVI cable while the system is running as
certain types of graphic cards do not send out video
signals.
Connect the DVI cable and then reboot the system.
Unlock the OSD by pressing the [MENU /
least 5 seconds.
Check the signal cable connection.
Make sure the video card is fully inserted in it's slot.
Reboot the computer.
Set the video card by referring to the video card manual.
Adjust screen image position and size using the OSD.
Adjust the resolution and frequency at the video card.
(Refer to the
Preset Timing
Adjust the resolution and frequency of the video card.
(Refer to the
Preset Timing
Adjust the frequency properly by referring to the video
card manual and the
Preset Timing
(The maximum frequency per resolution may differ from
product to product.)
Windows XP :
Set the resolution in the Control Panel → Appearance
and Themes → Display → Settings.
Windows ME/2000 :
Set the resolution in the Control Panel → Display →
Settings.
Set the video card by referring to the video card manual.
Install the monitor driver according to the
Installation
Instructions.
] button for at
Modes).
Modes).
Modes.
Driver