Cisco 3600 Series 업그레이드 지침 - 페이지 22

{카테고리_이름} Cisco 3600 Series에 대한 업그레이드 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3600 Series 30 페이지. Memory upgrade
Cisco 3600 Series에 대해서도 마찬가지입니다: 제품 개요 (10 페이지), 소유자 매뉴얼 (17 페이지), 애플리케이션 노트 (41 페이지), 구성 매뉴얼 (36 페이지), 사용자 설명서 (25 페이지), 부록 (15 페이지), 사용자 설명서 (7 페이지), 매뉴얼 (5 페이지), 구성 참고 사항 (23 페이지), 구성 참고 사항 (18 페이지), 구성 참고 사항 (25 페이지)

Cisco 3600 Series 업그레이드 지침
Upgrading System Memory in Cisco 3745 Routers
Figure 10
Step 4
When both ends of the SODIMM are released from the socket, grasp the ends of the SODIMM with your
thumb and forefinger and pull it completely out of the socket. Place it in an antistatic bag to protect it
from ESD damage.
If necessary, repeat
Step 5
Proceed to the
Step 6
Installing SDRAM SODIMMs
To install SDRAM SODIMMs, follow these steps:
Attach an ESD-preventive wrist strap and ensure that it makes good contact with your skin. Connect the
Step 1
equipment end of the wrist strap to the metal back plate of the chassis, avoiding contact with the
connectors.
Step 2
On the mainboard, locate the SDRAM SODIMM socket. (See
Caution
Handle the SODIMM by the edges only; do not touch the memory modules, pins, or traces (metal fingers
along the connector edge). Handle carefully. SODIMMs are ESD-sensitive components and can be
damaged by mishandling.
Upgrading System Memory in Cisco 3700 Series Routers
22
Removing and Installing SDRAM SODIMMs in the Cisco 3745 Router
Pull the tabs away with
your thumbs, bracing your
forefingers against the
rails. The memory module
will pop loose. Then raise the
memory module to a
vertical position.
Memory module
Step 3
and
Step 4
to remove the bottom SODIMM.
"Installing SDRAM DIMMs" section on page
15.
Figure
9.)
OL-5423-02