Cisco 3905 사용자 설명서 - 페이지 19

{카테고리_이름} Cisco 3905에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3905 36 페이지. Cisco systems telephone user manual
Cisco 3905에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (2 페이지), 사용자 설명서 (3 페이지), 특징 (6 페이지), 사용자 설명서 (40 페이지), 특징 (11 페이지), 사용자 설명서 (16 페이지), 빠른 참조 매뉴얼 (2 페이지), 매뉴얼 사용 (16 페이지), 사용자 설명서 (2 페이지), (포르투갈어) 빠른 시작 설명서 (1 페이지)

Basic Operations

Procedure

Step 1

Verify that you are on an active call (not on hold).

Step 2

Press Transfer

Step 3

Enter the transfer recipient's phone number or press a speed-dial button.

Step 4

Wait for the recipient to answer, or skip to the next step while the call is ringing.

Step 5

Press Transfer

Toggle Between Calls Before Completing Transfer

After you connect to the transfer recipient—but before you transfer a call to this party—you can press the

Hold/Resume button to toggle between the two calls. This allows you to consult privately with the party on

each call before you complete the transfer.

Procedure

Step 1

Press the Hold/Resume button to toggle between the party that you intend to transfer and the transfer recipient.

Step 2

After you finish speaking with the transfer recipient, press the Transfer button to complete the transfer.

Hold allows you to put an active call into a held state.

Procedure

Step 1

To put a call on hold, press the Hold/Resume button

The party that is put on hold hears the preset music.

Step 2

To resume the call, press the Hold/Resume button

You can block audio input for your handset, headset, and speakerphone, so that you can hear other parties on

the call but they cannot hear you.

again.

Cisco Unified SIP Phone 3905 User Guide for Cisco Unified Communications Manager 10.0 (SIP)

Toggle Between Calls Before Completing Transfer