Cisco 3905 User Manual - Page 19

Browse online or download pdf User Manual for IP Phone Cisco 3905. Cisco 3905 36 pages. Cisco systems telephone user manual
Also for Cisco 3905: User Manual (14 pages), User Manual (40 pages), User Manual (2 pages), User Manual (3 pages), Features (6 pages), User Manual (40 pages), Features (11 pages), User Manual (16 pages), Quick Reference Manual (2 pages), Using Manual (16 pages), User Manual (2 pages), (Portuguese) Quick Start Manual (1 pages)

Print Page

Basic Operations

Procedure

Step 1

Verify that you are on an active call (not on hold).

Step 2

Press Transfer

Step 3

Enter the transfer recipient's phone number or press a speed-dial button.

Step 4

Wait for the recipient to answer, or skip to the next step while the call is ringing.

Step 5

Press Transfer

Toggle Between Calls Before Completing Transfer

After you connect to the transfer recipient—but before you transfer a call to this party—you can press the

Hold/Resume button to toggle between the two calls. This allows you to consult privately with the party on

each call before you complete the transfer.

Procedure

Step 1

Press the Hold/Resume button to toggle between the party that you intend to transfer and the transfer recipient.

Step 2

After you finish speaking with the transfer recipient, press the Transfer button to complete the transfer.

Hold allows you to put an active call into a held state.

Procedure

Step 1

To put a call on hold, press the Hold/Resume button

The party that is put on hold hears the preset music.

Step 2

To resume the call, press the Hold/Resume button

You can block audio input for your handset, headset, and speakerphone, so that you can hear other parties on

the call but they cannot hear you.

again.

Cisco Unified SIP Phone 3905 User Guide for Cisco Unified Communications Manager 10.0 (SIP)

Toggle Between Calls Before Completing Transfer