Siemens 2AI 2/4WIRE HF 매뉴얼 - 페이지 14

{카테고리_이름} Siemens 2AI 2/4WIRE HF에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens 2AI 2/4WIRE HF 28 페이지.

Parameters

2.2 Parameter description

2.2

Parameter description

Smoothing

The individual measured values are smoothed by digital filtering. The smoothing can be

adjusted in four steps, in which the smoothing factor k multiplied with cycle time of the

electronic module equals the time constant of the smoothing filter. The greater the

smoothing, the greater the time constant of the filter.

The following diagrams show the step response with the various smoothing factors in

relation to the number of module cycles.

Interference frequency suppression

The 2 AI I 2/4WIRE HF analog input module supports the setting of interference frequency

suppression (50 Hz or 60 Hz) on the interface module. This analog input module

(HIGH FEATURE) also enables the interference frequency suppression to be disabled; i.e.,

this setting can be ignored on the interface module. Disabling interference suppression

improves the conversion and cycle times in these modules.

2 AI I 2/4WIRE HF analog electronic module (6ES7134-4MB02-0AB0)

Manual, 04/2007, A5E01076111-01