Siemens 2AI 2/4WIRE HF 매뉴얼 - 페이지 25

{카테고리_이름} Siemens 2AI 2/4WIRE HF에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens 2AI 2/4WIRE HF 28 페이지.

5.2

Wiring unused channels of the analog input modules

Rules

Pay attention to the following instructions when wiring unused channels:

● "Deactivate" unused input channels when assigning parameters.

● A deactivated channel always returns the value 7FFF

5.3

Rules

To prevent interference we recommend the following for analog electronic modules:

● Use shielded wires to the sensors and actuators.

● Lay out the wire shields on the shield connection.

● Connect the shield connection to the ground bus with low impedance.

2 AI I 2/4WIRE HF analog electronic module (6ES7134-4MB02-0AB0)

Manual, 04/2007, A5E01076111-01

5.2 Wiring unused channels of the analog input modules

Connecting