Siemens 2AI 2/4WIRE HF 매뉴얼 - 페이지 23

{카테고리_이름} Siemens 2AI 2/4WIRE HF에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens 2AI 2/4WIRE HF 28 페이지.

Isolated measuring encoders

The isolated measuring encoders are not connected to the local ground potential. These can

be potential-free. Depending on local conditions or interference, potential differences U

(static or dynamic) can occur between the measuring lines M- of the input channels and the

reference point of the measuring circuit M

The permitted value for U

interference.

The following schematic representation illustrates the connection of isolated measuring

encoders to the optically isolated analog input modules.

①

②

③

④

⑤

2 AI I 2/4WIRE HF analog electronic module (6ES7134-4MB02-0AB0)

Manual, 04/2007, A5E01076111-01

must not be exceeded, even in environments with strong EMC

Logic

Backplane bus

Ground bus

Central grounding point

Isolated measuring encoders

ANA

5.1 Connecting measuring sensors

Connecting