Cisco 522 매뉴얼 - 페이지 32
{카테고리_이름} Cisco 522에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 522 40 페이지. Ip phones with multiplatform firmware
Cisco 522에 대해서도 마찬가지입니다: 사용자 설명서 (46 페이지), 관리 매뉴얼 (48 페이지), 설치 매뉴얼 (39 페이지), 매뉴얼 (24 페이지)
페이지 인쇄
Configure a Headset on the Phone
Procedure
Step 1
Press Applications
Step 2
Select Accessories and then your headset.
Step 3
Navigate to Setup > Microphone > Test.
Step 4
Press Record and speak into the microphone.
Step 5
Press Stop rec when you finish speaking.
Step 6
Press Play to review your test recording.
Configure a Headset on the Phone
After you have connected the headset, you may have to configure it on your phone.
If you have a Cisco headset with a USB adapter, then follow the steps in
page 29
Reset Cisco Headset Settings from Your Phone
You can reset your Cisco headset to remove your custom settings. This action returns the headset to the original
configuration set by your administrator.
Your phone must be running Firmware Release 12.5(1)SR3 or later for this feature to function.
Before you begin
Connect your headset to the phone:
• Cisco Headset 520 Series: Connect with the USB adapter
• Cisco Headset 530 Series: Connect with the USB cable
• Cisco Headset 560 Series: Connect the standard base or multibase with the USB or Y-cable.
Procedure
Step 1
On the phone, press Applications
Step 2
Select Accessories > Setup > Reset settings.
Step 3
At the warning window, select Reset.
Adjust the Headset Feedback
When you use a headset, you can hear your own voice in the earpiece, which is called headset sidetone or
headset feedback. You can control the amount of headset sidetone on your phone.
Headsets
32
.
.
Headsets
Cisco Headset Customization, on