Cisco 522 매뉴얼 - 페이지 26

{카테고리_이름} Cisco 522에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 522 40 페이지. Ip phones with multiplatform firmware
Cisco 522에 대해서도 마찬가지입니다: 사용자 설명서 (46 페이지), 관리 매뉴얼 (48 페이지), 설치 매뉴얼 (39 페이지), 매뉴얼 (24 페이지)

페이지 인쇄

Restart the Cisco TFTP Server

Step 5

Click Close.

Restart the Cisco TFTP Server

After you upload the defaultheadsetconfig.json file to the TFTP directory, restart the Cisco TFTP

server and reset the phones. After about 10–15 minutes, the download process begins and the new configurations

are applied to the headsets. It takes an additional 10 to 30 minutes for the settings to be applied.

Procedure

Step 1

Step 2

From the Server drop-down list box, choose the server on which the Cisco TFTP service is running.

Step 3

Click the radio button that corresponds to the Cisco TFTP service.

Step 4

Click Restart.

Connect a Headset to Your Phone

Each type of wired headset, adapter, or base connects to a phone using a different port and a different type of

connector and cable. Common types include an RJ connector, a USB connector, and a Y-cable.

Connect a Standard Headset

You can use a standard headset with your desk phone. Standard headsets plug into the headset jack on the

back of the phone with an RJ-type connecter.

Figure 13: Standard Headset Connection

Caution

Failure to press the cable into the channel in the phone can damage the printed circuit board inside the phone.

The cable channel reduces the strain on the connector and the printed circuit board.

Headsets