Cisco 522 Manual - Page 26
Browse online or download pdf Manual for IP Phone Cisco 522. Cisco 522 40 pages. Ip phones with multiplatform firmware
Also for Cisco 522: User Manual (46 pages), Administration Manual (48 pages), Installation Manual (39 pages), Manual (24 pages)
Restart the Cisco TFTP Server
Step 5
Click Close.
Restart the Cisco TFTP Server
After you upload the defaultheadsetconfig.json file to the TFTP directory, restart the Cisco TFTP
server and reset the phones. After about 10–15 minutes, the download process begins and the new configurations
are applied to the headsets. It takes an additional 10 to 30 minutes for the settings to be applied.
Procedure
Step 1
Log in to Cisco Unified Serviceability and choose Tools > Control Center - Feature Services.
Step 2
From the Server drop-down list box, choose the server on which the Cisco TFTP service is running.
Step 3
Click the radio button that corresponds to the Cisco TFTP service.
Step 4
Click Restart.
Connect a Headset to Your Phone
Each type of wired headset, adapter, or base connects to a phone using a different port and a different type of
connector and cable. Common types include an RJ connector, a USB connector, and a Y-cable.
Connect a Standard Headset
You can use a standard headset with your desk phone. Standard headsets plug into the headset jack on the
back of the phone with an RJ-type connecter.
Figure 13: Standard Headset Connection
Caution
Failure to press the cable into the channel in the phone can damage the printed circuit board inside the phone.
The cable channel reduces the strain on the connector and the printed circuit board.
Headsets
26
Headsets