Cisco 6851 사용자 설명서 - 페이지 25

{카테고리_이름} Cisco 6851에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 6851 40 페이지. Multiplatform phones
Cisco 6851에 대해서도 마찬가지입니다: 설치 매뉴얼 (39 페이지), 빠른 시작 매뉴얼 (2 페이지), 재구성 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 사용 설명서 (2 페이지), 사용자 설명서 (8 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

Step 5 To forward all calls, press 1.

• Enter forwarding destination number followed by the # sign.

• You will hear, "All calls will be forwarded".

Step 6 To send all calls to your line, press 2.

• You will hear, "Calls will ring your line, goodbye".

Transfer Calls

You can transfer an active call to another person.

Call Transfer – Attended Transfer

When you transfer a call, you can stay on the original call until the other person answers. This gives you an

opportunity to talk privately with the other person before you remove yourself from the call.

You can also swap between both callers to consult with them individually before you remove yourself from the

call.

Before you begin

You have an active call that needs to be transferred.

Procedure

Step 1 From a call that is not on hold, press Transfer

Step 2 Enter the other person's phone number.

Step 3 When the extension/phone number called picks up, inform them of the transfer.

Step 4 Press Transfer again.

Call Transfer – Blind Transfer

If you are sending a call to another party and do not need to talk to them before transferring the call, use this

method. The party you transfer the call to will see the call as if it is coming from the original caller.

Before you begin

You have an active call that needs to be transferred.

Procedure

Step 1 Press Transfer

Step 2 Press [Blind].

Step 3 Dial the extension/phone number where the call should be transferred.

Step 4 Hang up

• The caller will be transferred over to the new extension/phone number.

25 |

P a g e

Cisco IP Phone 6851 Series User Guide