Digital Guard Dawg Watch Dawg-X2 기능 및 작동 지침 - 페이지 3

{카테고리_이름} Digital Guard Dawg Watch Dawg-X2에 대한 기능 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Guard Dawg Watch Dawg-X2 6 페이지.

With the Engine off press the start button (lightning bolt icon) on the transmitter twice within 3

seconds, the bike will start automatically within 1 second. After successfully starting the transmitter will

illuminate the exhaust icon and will beep 3 times. The engine cannot be shut off until the UNLOCK

(unlock icon) button is pressed.

Prompt to set Alarm

After stopping the bike if the alarm is not set within 8 seconds the bike will make 3 beeps and flash the

turn signals 3 times, to remind the rider to arm the bike.

Remotely killing the Bike

When the Bike is driving, hold down the LOCK (lock icon) button for 2s or longer, the turn signals will

flash rapidly as the bike starts to enter anti‐theft mode. The horn of the bike will make a loud sound, the

turn signals will flash, and the vehicles engine will die 20 seconds later. This state can only be stopped by

pressing the UNLOCK (unlock icon) button.

To Shut off the Remote Start

While the bike is running (due to a remote start), press the unlock (unlock icon) button to remotely stop

your bike.

Automatic Re‐arm

While the bike is armed if the UNLOCK (unlock icon) button is pressed the alarm will disarm, lf the bike is

not started within 25 seconds the alarm will automatically re‐arm itself. The transmitter will beep upon

arming indicating it has re‐armed. The bike will also beep indicating it has re‐armed.