Cisco 7832 사용자 설명서 - 페이지 10

{카테고리_이름} Cisco 7832에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7832 21 페이지. Ip conference phone
Cisco 7832에 대해서도 마찬가지입니다: 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 빠른 시작 매뉴얼 (2 페이지), 문제 해결 매뉴얼 (10 페이지), 매뉴얼 (22 페이지), 시작하기 (6 페이지), 설치 매뉴얼 (39 페이지), 빠른 시작 매뉴얼 (2 페이지), 재구성 매뉴얼 (2 페이지), 빠른 시작 (2 페이지), 빠른 시작 (2 페이지), 매뉴얼 (30 페이지), 사용 설명서 (9 페이지), 빠른 참조 (2 페이지)

Softkey Procedure

Step 1 Press More  softkey

Step 2 Press DND softkey to turn ON, Press Clr DND to turn OFF.

Code Procedure

Step 1 To turn on DND, dial *78.

Step 2 To turn off DND, dial *79.

Call Screening

You have control to ensure you receive important calls. You can limit the callers that ring your phone,

filter callers, or forward important callers to another number. Calls from anonymous callers, or other

callers, can be given special treatment: either being blocked, sent directly to voicemail, forwarded to

another phone number (like your mobile), or having a custom ring pattern assigned.

Anonymous Call Block

Calls from anonymous callers or phones not sending a caller ID, can waste your time and distract you

from other calls you want to take. These calls can be filtered from even ringing your phone. You can

choose to have anonymous callers either hear a busy signal or a message informing them that you are

not accepting calls from anonymous callers.

Enable/Disable Anonymous Call Block

Anonymous caller will hear a busy tone.

Step 1 Dial *77 to enable Anonymous Call Block.

• You will hear a prompt saying, "Your anonymous call rejection service has been activated. All incoming

calls will be checked for number privacy before they are allowed to complete to your line".

Step 2 Dial *87 to disable Anonymous Call Block.

• You will hear a prompt saying, "Your anonymous call rejection service has been deactivated".

Enable/Disable Anonymous Call Block with Message

Anonymous caller will hear a message indicating anonymous callers are not allowed.

Step 1 Dial *95 to enable Anonymous Call Block with Message.

• You will hear a prompt saying, "Your anonymous call rejection service has been activated. All incoming

calls will be checked for number privacy before they are allowed to complete to your line".

Step 2 Dial *97 to disable Anonymous Call Block with Message.

• You will hear a prompt saying, "Your anonymous call rejection service has been deactivated".

10 |

P a g e

Procedure

Cisco IP Phone 7832 Series User Guide