Cisco 7832 매뉴얼 - 페이지 22

{카테고리_이름} Cisco 7832에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7832 30 페이지. Ip conference phone
Cisco 7832에 대해서도 마찬가지입니다: 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (21 페이지), 문제 해결 매뉴얼 (10 페이지), 매뉴얼 (22 페이지), 시작하기 (6 페이지), 설치 매뉴얼 (39 페이지), 빠른 시작 매뉴얼 (2 페이지), 재구성 매뉴얼 (2 페이지), 빠른 시작 (2 페이지), 빠른 시작 (2 페이지), 사용 설명서 (9 페이지), 빠른 참조 (2 페이지)

Find Information About Your Phone

• The call control system has communication or internal problems.

• Your phone has internal problems.

If you experience problems, your administrator can help troubleshoot the root cause of the problem.

Find Information About Your Phone

Your administrator may ask for information about your phone. This information uniquely identifies the phone

for troubleshooting purposes.

The phone contains all unique device identifier (UDI) information. The UDI is composed of three data elements

associated with the phone. The data elements are:

• Product Identifier (PID)

• Version Identifier (VID)

• Serial Number (SN)

You can also find the information about your phone by going to Info > Status > Product Information on

the phone web interface.

Procedure

Step 1

Press Settings.

Step 2

Select Status > Product Information.

You can view the following information:

Product name— Name that represents the Cisco IP Phone.

Serial number— Serial number of the Cisco IP Phone.

MAC address—Hardware address of the Cisco IP Phone.

Software version—Version number of the Cisco IP Phone firmware.

Configuration version—Version number of the Cisco IP Phone configuration. This information shows when

your administrator has enabled it.

Hardware version—Version number of the Cisco IP Phone hardware.

VID—Version ID of the Cisco IP Phone.

Certificate—Status of the client certificate, which authenticates the Cisco IP Phone for use in the ITSP

network. This field indicates if the client certificate is properly installed in the phone.

Customization—For an RC unit, this field indicates whether the unit has been customized or not. Pending

indicates a new RC unit that is ready for provisioning. If the unit has already retrieved its customized profile,

this field displays the Customization state as Acquired.

Step 3

Press Back to return to the Applications screen.

Your Phone