Cisco 7832 매뉴얼 - 페이지 23

{카테고리_이름} Cisco 7832에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7832 30 페이지. Ip conference phone
Cisco 7832에 대해서도 마찬가지입니다: 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (21 페이지), 문제 해결 매뉴얼 (10 페이지), 매뉴얼 (22 페이지), 시작하기 (6 페이지), 설치 매뉴얼 (39 페이지), 빠른 시작 매뉴얼 (2 페이지), 재구성 매뉴얼 (2 페이지), 빠른 시작 (2 페이지), 빠른 시작 (2 페이지), 사용 설명서 (9 페이지), 빠른 참조 (2 페이지)

Your Phone

View the Customization State on the Phone

After the RC download from the EDOS server completes, you can view the customization state of a phone

on the screen.

Here are the descriptions of the remote customization states:

• Open—The phone has booted for the first time and is not configured.

• Aborted—Remote Customization is aborted due to other provisioning, for example, DHCP options.

• Pending—The phone can not download the profile from the EDOS server.

• Custom-Pending—The phone has downloaded a redirect URL from the EDOS server.

• Acquired—In the profile downloaded from the EDOS server, there is a redirect URL for provision

• Unavailable—Remote customization has stopped because the EDOS server responded with an empty

Procedure

Step 1

Press Settings.

Step 2

Select Status > Product information > Customization.

Step 3

Press Back.

View the Network Status

Procedure

Step 1

Press Settings .

Step 2

Select Status > Network status.

You can view the following information:

• Network type—Indicates the type of Local Area Network (LAN) connection that the phone uses.

• Network status—Indicates if the phone is connected to a network.

• IPv4 status—IP address of the phone. You can see information on IP address, Addressing type, IP status,

• IPv6 status —IP address of the phone. You can see information on IP address, Addressing type, IP

• VLAN ID—VLAN ID of the phone.

• MAC address—Unique Media Access Control (MAC) address of the phone.

• Host name—Displays the current host name assigned to the phone.

configuration. If the redirect URL download from the provisioning server is successful, this state is

displayed.

provisioning file and the HTTP response was 200 OK.

Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.

status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.

View the Customization State on the Phone

Your Phone