Siemens avantGarde SKU HB30D50U 설치 매뉴얼 - 페이지 7

{카테고리_이름} Siemens avantGarde SKU HB30D50U에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens avantGarde SKU HB30D50U 21 페이지. Built-in ovens
Siemens avantGarde SKU HB30D50U에 대해서도 마찬가지입니다: 기능 및 이점 (1 페이지)

페이지 인쇄

5. Install Oven

1. Slide oven into cabinet cutout.

2. Push straight in until oven trim is ﬂ ush with

cabinet wall, being careful not to crimp ﬂ exible con-

duit between oven and cabinet back wall. The oven

should be straight, not crooked.

3. Install screws (two or four depending on model)

through tap holes in trim.

6. Test Operation

1. Verify that all control knobs are in the OFF position.

2. Turn on power at the breaker.

The clock will appear in the display.

3. Check power at junction box using a volt meter.

For 240 V installation, the reading between the red

and black wires (line to line) should be 220 to 240

volts.

For 208 V installation, the reading between the red

and black wires (line to line) should be 190 to 208

volts.

4. Test the oven mode.

Press COOKING MODE.

Turn knob to BAKE.

Touch START.

PREHEAT appears in display.

When the oven has reached the set temperature

(350° F), it beeps and PREHEAT no longer appears.

If installing a double oven, test the second oven as

well.

5. If any of the tests do not result as explained above,

contact Siemens service: 866-44-SIEMENS. Other

wise, the installation is complete at this time.

Step 5 and 6: Install Oven and Test Operation

English •