Siemens Silver 1095 작동 및 설치 지침 - 페이지 13

{카테고리_이름} Siemens Silver 1095에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Silver 1095 44 페이지. Computer controlled slimline frontloader

Filling laundry

detergent and/or

additive dispensers

Dispensing the correct amount of detergent

relieves the strain on the environment and ensures

optimum washing results.

Frequent use of insufficient detergent will eventually

become noticeable as follows:

- washing appears grey or not properly clean

- grey-brown stains(grease marks) form on the

washing

- scale builds up on the heating elements

Too much detergent results in:

- unnecessarily high environmental pollution

- due to the generation of too much foam, the

washing is hardly agitated which leads to

poor washing results.

The amount of detergent indicated on its packaging

refers to a full machine load.

For small loads or less soiling, reduce the amount

of detergent.

Chamber I:

Detergent for prewash, starch or pre-soaking

agent.

Chamber II:

Detergent for main wash, water softener, bleach

and stain removal product.

Chamber

Additives, e.g. fabric softener of former.

- Do not fill beyond the MAX mark, otherwise

will be flushed into the machine together with

the detergent at the start of the program.

- If the liquid additive is thick, mix with a little

water before dispensing(prevents clogging of

the overflow).

Pull out the detergent dispenser up to the end

stop.

Add the detergent and/or additive.

Close the detergent dispenser.