Siemens Silver 1095 Çalıştırma ve Kurulum Talimatları - Sayfa 13

Yıkayıcı Siemens Silver 1095 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Siemens Silver 1095 44 sayfaları. Computer controlled slimline frontloader

Sayfayı Yazdır

Filling laundry

detergent and/or

additive dispensers

Dispensing the correct amount of detergent

relieves the strain on the environment and ensures

optimum washing results.

Frequent use of insufficient detergent will eventually

become noticeable as follows:

- washing appears grey or not properly clean

- grey-brown stains(grease marks) form on the

washing

- scale builds up on the heating elements

Too much detergent results in:

- unnecessarily high environmental pollution

- due to the generation of too much foam, the

washing is hardly agitated which leads to

poor washing results.

The amount of detergent indicated on its packaging

refers to a full machine load.

For small loads or less soiling, reduce the amount

of detergent.

Chamber I:

Detergent for prewash, starch or pre-soaking

agent.

Chamber II:

Detergent for main wash, water softener, bleach

and stain removal product.

Chamber

Additives, e.g. fabric softener of former.

- Do not fill beyond the MAX mark, otherwise

will be flushed into the machine together with

the detergent at the start of the program.

- If the liquid additive is thick, mix with a little

water before dispensing(prevents clogging of

the overflow).

Pull out the detergent dispenser up to the end

stop.

Add the detergent and/or additive.

Close the detergent dispenser.