Siemens WM12W520IL 사용 설명서 및 설치 지침 - 페이지 31

{카테고리_이름} Siemens WM12W520IL에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens WM12W520IL 48 페이지.

The drain hose at the siphon

is blocked

Switch off the appliance. Pull out the

mains plug.

Loosen the hose clamp. Carefully

remove the drain hose; residual

water may leak out.

Clean the drain hose and siphon

connecting piece.

Re-attach the drain hose and secure

the connection point using the hose

clamp.

Filter in the water supply

blocked

First, reduce the water pressure in the

supply hose:

Turn off the tap.

Select any programme (except

Rinse/Spin/Empty).

Press the Ü button. Allow the

programme to run for approximately

40 seconds.

Press the # button. The appliance is

switched off.

Pull out the mains plug.

Cleaning and maintenance

Then clean the filter:

Disconnect the hose from the tap.

Clean the filter with a small brush.

For standard and Aqua-Secure

models, clean the filter on the rear of

the appliance:

Remove the hose from the rear of

the appliance.

Use pliers to remove the filter and

then clean it.

Connect the hose and check for

leaks.