Epson ActionNote 500C 사용자 설명서 부록 - 페이지 22
{카테고리_이름} Epson ActionNote 500C에 대한 사용자 설명서 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionNote 500C 39 페이지. Product information guide
Epson ActionNote 500C에 대해서도 마찬가지입니다: 제품 지원 게시판 (9 페이지), 제품 지원 게시판 (1 페이지), 제품 정보 매뉴얼 (8 페이지)
페이지 인쇄
note
The projector's image
source must be set to
Video, and the video
source (such as a VCR or
camcorder) must be
connected and operating
for you to access these
menu options. For
example, the projector
must actually be
projecting the image from
your video tape if you're
using a VCR.
Using the Projector Menus
22
Video Menu (Video Image Source)
The Video menu lets you make adjustments to the projected
image. The following options are available when the image
source is Video.
Menu item
Description
Position
Use the Enter button to move the screen
position in the corresponding direction.
When you finish making adjustments, press the
Esc button.
Brightness
Lightens or darkens the overall image. Increase
brightness to lighten an image, or decrease it to
darken the image.
Contrast
Adjusts the degree of difference between light
and dark areas. Increase the contrast to make
light areas lighter and dark areas darker.
Decrease it to minimize the difference between
the lightest and darkest areas of the image.
Color
Adjusts color density. Increase the setting for
darker and more opaque colors. Decrease it for
lighter and less opaque colors.
Tint
Adjusts the red-green color balance of the
(NTSC only)
screen. Increase tint to add more green, or
decrease it to add more red.
Sharpness
Adjusts the sharpness of the screen image.
Gamma
Adjusts the projected image for natural
coloration.
Mode
Specifies the image signal mode: Auto, NTSC,
NTSC4.43, PAL, M-PAL, N-PAL, PAL 60,
SECAM.
Reset
Returns all menu items to their initial factory
defaults.