Siemens WS G Series 사용 설명서 및 설치 지침 - 페이지 18

{카테고리_이름} Siemens WS G Series에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens WS G Series 28 페이지.

Cleaning and maintenance

Close the service flap.

To prevent unused detergent

Note:

from flowing into the outlet during the

next wash: Pour 1 litre of water into

dispenser II and start the p Empty

programme.

The drain hose at the siphon

is blocked

Set the programme selector to the

"Off" position. Pull out the mains

plug.

Loosen hose clip and carefully

remove drainage hose.

Residual water may run out.

Clean the drainage hose and siphon

connecting piece.

Re-attach the drainage hose and

secure the connection point using

the hose clip.

Filter in the water supply

blocked

First, reduce the water pressure in the

inlet hose:

Turn off the tap.

Select any programme (except 0

Spin and p Empty).

Press the Start button. Allow the

programme to run for approx. 40 s.

Set the programme selector to the

"Off" position. Unplug the mains

plug.

Clean the filter on the tap:

Disconnect the hose from the tap.

Clean the filter with a small brush.

Clean the filter on the back of the

appliance:

Disconnect the hose from the rear of

the appliance,

Use pliers to remove the filter and

then clean it.

Connect the hose and check for

leaks.