Cisco 7940G 사용자 설명서 - 페이지 10

{카테고리_이름} Cisco 7940G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7940G 15 페이지. Ios telephony services ip phone
Cisco 7940G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 데이터시트 (7 페이지), 매뉴얼 (35 페이지), 빠른 참조 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지), 전화 매뉴얼 (17 페이지), 관리자 매뉴얼 (15 페이지), 사용자 설명서 (16 페이지), 참조 매뉴얼 (24 페이지), 관리 매뉴얼 (29 페이지), 매뉴얼 (21 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (10 페이지)

Note

Redirecting Calls on Your Phone

To transfer a call:

1. To transfer an active call to another phone, press the Trnsf softkey. This

automatically puts the call on hold.

2. Dial the number to which you want to transfer the call.

3. Press the Trnsfer button again to complete the transfer. You can do so

once the call begins to ring or once the recipient has answered.

4. Hang up to end your participation in the call.

Note

You can park a call when you want to store the call before retrieving it from

another phone in the CallManager System.

1. During an active call, press the more softkey and then select the Park

softkey.

2. The LCD screen displays the number where the call is parked.

3. Before hanging up the phone, take note of this number.

4. To retrieve the parked call from any phone in your CallManager, dial the

call park number where the call is parked.

Note

IP Phone 7940/60 User Manual

CCM 4.1

If you have multiple lines on hold and want to see the phone number for

a call you have on hold, press the ? button followed by the line button of

the call on hold.

Press the Resume softkey to return to the original call if you elect not to

transfer it.

If the call is not retrieved from park before the allotted amount of time, it

will ring back at its original destination.

Page 10

Office of Enterprise Technology

April 13, 2009