Cisco 7940G 참조 매뉴얼 - 페이지 14

{카테고리_이름} Cisco 7940G에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7940G 24 페이지. Ios telephony services ip phone
Cisco 7940G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 데이터시트 (7 페이지), 매뉴얼 (35 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (15 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지), 전화 매뉴얼 (17 페이지), 관리자 매뉴얼 (15 페이지), 사용자 설명서 (16 페이지), 관리 매뉴얼 (29 페이지), 매뉴얼 (21 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (10 페이지)

페이지 인쇄
Cisco 7940G 참조 매뉴얼
Press the Confrn softkey to place the existing call
•
on Hold and provide dial tone
Dial the extension or number that you would like
•
to add . Be sure to include the Outside Access
Digit for external calls .
After the new party answers, press the Confrn
•
softkey to join the parties together . If you reach
the voicemail or the party does not want to
join the conference, press the EndCall softkey
followed by the Resume softkey to return to the
original call without adding the new party .
Repeat these steps to add new parties
•

direCT eXTension assiGnMenT

Direct Extension Assignment lets you temporarily
reassign a telephone with your own telephone
number and profile .
To Temporarily assign your number and Profile
to a Phone
From the temporary phone, lift the handset and
•
dial 788
Enter your complete telephone number + # . If
•
your phone is configured as an extension-only
(i .e ., non-DID) line, enter your organization's
complete main telephone number + * + your
extension number + # .
Enter your phone password followed by the # key
•
To reassign the original Telephone number to
the Guest Phone
Follow the steps above using the original
•
telephone number and password that were
assigned to the phone
To reassign your own number and Profile back
to your own Phone
Pick up the handset of your phone
•
After the voice prompt, enter your complete
•
telephone number followed by the # key
After the voice prompt, enter your phone
•
password followed by the # key
Hang up
•
Note: Direct Extension Assignment requires that the
10