ACD DS210 Series 하드웨어 문서 - 페이지 7

{카테고리_이름} ACD DS210 Series에 대한 하드웨어 문서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACD DS210 Series 20 페이지.
ACD DS210 Series에 대해서도 마찬가지입니다: 간략한 개요 (15 페이지)

4.1.4 CONNECT

The CONNECT LED has a different meaning for each of the four device versions.

At the DS210 Standard the CONNECT LED glows green when the USB slave conductor has established a

connection with the PC as well as with the M210. It is not checked if the software driver is also loaded for the

connection!

At the DS210 Ethernet the CONNECT LED blinks green, when the DS210 is connected with the network

cable to the LAN (Ethernet) and the M210 has loaded the Ethernet driver. The CONNECT LED has the

same function as the green Link LED at the network connector (RJ45 with two integrated LED) at the back of

the unit.

At the DS210 Modem 56K TTL the CONNECT LED glows green when the analogue modem has established

a connection.

At the DS210 ISDN this LED can be compared with the status LED at standard ISDN adapters. The

CONNECT LED glows when the ISDN adapter has established a physical connection with the ISDN

conductor, this means when the ISDN RJ45 connecting cable is plugged in the plug socket of the ISDN

network as well as in the RJ45 connector of the DS210. The signaling of the CONNECT LED can also be

programmed inverted.

At the DS210 Ethernet two LED are integrated in the RJ45 connector at the back of the unit. The green LED

is the Link LED. It blinks when the DS210 is connected to the LAN (Ethernet) with a network cable and the

M210 has loaded the Ethernet driver. The yellow LED is the Tx LED. This one blinks when data are

transferred from the M210 via DS210 into the LAN.

Tx-LED

Link-LED

Connect. Power

supply pack

Pic. 2: RJ45 connector with LED

Pic. 3: Placing the M210 in the docking station DS210

DS210_HardwareDocu_V1.50_EN.doc

7 / 20