ACD DS210 Series 하드웨어 문서 - 페이지 6

{카테고리_이름} ACD DS210 Series에 대한 하드웨어 문서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACD DS210 Series 20 페이지.
ACD DS210 Series에 대해서도 마찬가지입니다: 간략한 개요 (15 페이지)

4 Operation of the DS210

Plug the power cord into the power supply pack. Plug the power cord into the power plug. Plug the low

tension connector of the power supply pack into the plug socket at the back of the DS210 on the left side

(see picture 2). The device is now ready for operation.

Disconnection of the equipment from the line voltage is done by

pulling the mains plug.

NOTE

The status LED of the DS210 are placed at the front.

Pic. 1: Status LED of the DS210

The POWER LED glows green when the DS210 is supplied with voltage via power supply pack.

The LED CHARGE is red when the M210 is being charged. When the M210 is completely charged, the LED

becomes green. For correct display, the M210 has to be switched off. When the M210 is switched on, the

LED CHARGE might possibly glow red, although the battery is already charged.

The LED 2. BATTERY glows red when the replacement battery is being charged. Then the replacement

battery is charged, the LED glows green.

DS210_HardwareDocu_V1.50_EN.doc

6 / 20