ACD DS210 Series Hardware Documentation - Page 6

Browse online or download pdf Hardware Documentation for Handhelds ACD DS210 Series. ACD DS210 Series 20 pages.
Also for ACD DS210 Series: Brief Overview (15 pages)

Print Page

4 Operation of the DS210

Plug the power cord into the power supply pack. Plug the power cord into the power plug. Plug the low

tension connector of the power supply pack into the plug socket at the back of the DS210 on the left side

(see picture 2). The device is now ready for operation.

Disconnection of the equipment from the line voltage is done by

pulling the mains plug.

NOTE

4.1 Status LED of the DS210

The status LED of the DS210 are placed at the front.

Pic. 1: Status LED of the DS210

4.1.1 POWER

The POWER LED glows green when the DS210 is supplied with voltage via power supply pack.

4.1.2 CHARGE

The LED CHARGE is red when the M210 is being charged. When the M210 is completely charged, the LED

becomes green. For correct display, the M210 has to be switched off. When the M210 is switched on, the

LED CHARGE might possibly glow red, although the battery is already charged.

4.1.3 2. BATTERY

The LED 2. BATTERY glows red when the replacement battery is being charged. Then the replacement

battery is charged, the LED glows green.

DS210_HardwareDocu_V1.50_EN.doc

6 / 20