ACD DS210 Series Документация по аппаратному обеспечению - Страница 6
Просмотреть онлайн или скачать pdf Документация по аппаратному обеспечению для Портативные компьютеры ACD DS210 Series. ACD DS210 Series 20 страниц.
Также для ACD DS210 Series: Краткий обзор (15 страниц)
Печатать страницу4 Operation of the DS210
Plug the power cord into the power supply pack. Plug the power cord into the power plug. Plug the low
tension connector of the power supply pack into the plug socket at the back of the DS210 on the left side
(see picture 2). The device is now ready for operation.
Disconnection of the equipment from the line voltage is done by
pulling the mains plug.
NOTE
4.1 Status LED of the DS210
The status LED of the DS210 are placed at the front.
Pic. 1: Status LED of the DS210
4.1.1 POWER
The POWER LED glows green when the DS210 is supplied with voltage via power supply pack.
4.1.2 CHARGE
The LED CHARGE is red when the M210 is being charged. When the M210 is completely charged, the LED
becomes green. For correct display, the M210 has to be switched off. When the M210 is switched on, the
LED CHARGE might possibly glow red, although the battery is already charged.
4.1.3 2. BATTERY
The LED 2. BATTERY glows red when the replacement battery is being charged. Then the replacement
battery is charged, the LED glows green.
DS210_HardwareDocu_V1.50_EN.doc
6 / 20