Samsung UN32C4000PD 사용자 설명서 - 페이지 32
{카테고리_이름} Samsung UN32C4000PD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung UN32C4000PD 46 페이지. 4000 series led tv
Samsung UN32C4000PD에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 사용자 설명서 (4 페이지), (스페인어) 매뉴얼 델 유저리오 (46 페이지), (한국어) 사용자 설명서 (46 페이지)
페이지 인쇄
Advanced Features
t
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV's remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theater
TV Rear Panel
1. Connect the
HDMI IN (1(DVI), 2, 3
using an HDMI cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎
NOTE
x
Connect the Optical cable between the
on the Home Theater.
x
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theater's Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the
DIGITAL AUDIO OUT (OPTICAL)
Amplifier or Home Theater, not the TV.
x
You can connect only one Home Theater.
x
You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
x
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
x
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
32
English
Optical Cable
(Not Supplied)
HDMI cable (Not Supplied)
or
4)
jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device
DIGITAL AUDIO OUT (OPTICAL)
jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the
Anynet+
Home Theater
Anynet+ Device 1
HDMI cable (Not Supplied)
jack on your TV and the Digital Audio Input
Anynet+ Device
2, 3, 4
HDMI cable (Not Supplied)