Samsung UN32C4000PD 사용자 설명서 - 페이지 34
{카테고리_이름} Samsung UN32C4000PD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung UN32C4000PD 46 페이지. 4000 series led tv
Samsung UN32C4000PD에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 사용자 설명서 (4 페이지), (스페인어) 매뉴얼 델 유저리오 (46 페이지), (한국어) 사용자 설명서 (46 페이지)
페이지 인쇄
Advanced Features
¦
Recording
You can make a recording of a TV Program using a Samsung recorder.
1. Select Recording.
✎
When there are more than two recording devices
x
When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎
When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the
EXIT
button to exit.
✎
You can record the source streams by selecting Recording: (device_name).
✎
Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device's users manual.
¦
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker.
1. Select Receiver and set to On.
2. Press the
EXIT
button to exit.
✎
If your receiver supports audio only, it may not appear in the device list.
✎
The receiver will work when you have properly connected the optical in jack of the receiver to the
OUT (OPTICAL)
✎
When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV's Optical jack. When
the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a
power failure), the Speaker Select may be set to External Speaker when you turn the TV on again.
✎
NOTE
x
You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
x
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
x
The Anynet+ functions do not operate with other manufacturers' products.
34
English
jack of the TV.
DIGITAL AUDIO