Cisco 7941G - Unified IP Phone VoIP 전화 매뉴얼 - 페이지 19

{카테고리_이름} Cisco 7941G - Unified IP Phone VoIP에 대한 전화 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7941G - Unified IP Phone VoIP 30 페이지. Unified communications manager 9.0 (sccp and sip)
Cisco 7941G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 데이터시트 (7 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (13 페이지), 관리 매뉴얼 (12 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (6 페이지), 관리 매뉴얼 (16 페이지), 문제 해결 및 유지 관리 (27 페이지)

Tip

You cannot use Transfer to redirect a call on hold. Press Resume to remove the call from hold before

transferring it.

Forwarding All Calls to Another Number

You can use Call Forward All to redirect incoming calls from your phone to another number.

If you want to...

Set up call forwarding on

your primary line

Cancel call forwarding on

your primary line

Verify that call forwarding is

enabled on your primary line

Forward all calls directly to

voicemail

Note: When call forwarding is enabled for any line other than the primary line, your phone does not

provide you with any confirmation that calls are being forwarded.

Tips

•

You must enter the call forward target number exactly as you would dial it from your phone.

For example, enter an access code or the area code, if necessary.

•

You must configure this feature per line; if a call reaches you on a line where call forwarding is

not enabled, the call will ring as usual.

Your Cisco Unified IP Phone allows you to join up to four parties into one telephone conversation,

creating a conference call.

Understanding Standard (ad hoc) Conference Calls

You can create a standard conference in different ways, depending on your needs and the softkeys

available on your phone:

•

Confrn—Use this softkey to establish a standard conference by calling each participant.

•

Join—Use this softkey to establish a standard conference by joining several calls already on

one line.

A standard (ad hoc) conference allows up to four people to participate in a single call.

Then...

Press CFwdALL and enter a target phone number.

Press CFwdALL.

Look for:

• The call forward icon above the primary phone number:

• The call forwarding target number in the status line.

Press CFwdALL and enter extension 3620, the ext for voicemail

for Cisco phones.