Cisco 7941G - Unified IP Phone VoIP Instrukcja obsługi telefonu - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi telefonu dla Telefon IP Cisco 7941G - Unified IP Phone VoIP. Cisco 7941G - Unified IP Phone VoIP 30 stron. Unified communications manager 9.0 (sccp and sip)
Również dla Cisco 7941G - Unified IP Phone VoIP: Podręcznik użytkownika (21 strony), Podręcznik użytkownika (25 strony), Arkusz danych (7 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (4 strony), Podręcznik użytkownika (4 strony), Podręcznik użytkownika (13 strony), Podręcznik administracyjny (12 strony), Podręcznik użytkownika (13 strony), Podręcznik użytkownika (13 strony), Podręcznik użytkownika (6 strony), Podręcznik administracyjny (16 strony), Rozwiązywanie problemów i konserwacja (27 strony)

Tip

You cannot use Transfer to redirect a call on hold. Press Resume to remove the call from hold before

transferring it.

Forwarding All Calls to Another Number

You can use Call Forward All to redirect incoming calls from your phone to another number.

If you want to...

Set up call forwarding on

your primary line

Cancel call forwarding on

your primary line

Verify that call forwarding is

enabled on your primary line

Forward all calls directly to

voicemail

Note: When call forwarding is enabled for any line other than the primary line, your phone does not

provide you with any confirmation that calls are being forwarded.

Tips

•

You must enter the call forward target number exactly as you would dial it from your phone.

For example, enter an access code or the area code, if necessary.

•

You must configure this feature per line; if a call reaches you on a line where call forwarding is

not enabled, the call will ring as usual.

Your Cisco Unified IP Phone allows you to join up to four parties into one telephone conversation,

creating a conference call.

Understanding Standard (ad hoc) Conference Calls

You can create a standard conference in different ways, depending on your needs and the softkeys

available on your phone:

•

Confrn—Use this softkey to establish a standard conference by calling each participant.

•

Join—Use this softkey to establish a standard conference by joining several calls already on

one line.

A standard (ad hoc) conference allows up to four people to participate in a single call.

Then...

Press CFwdALL and enter a target phone number.

Press CFwdALL.

Look for:

• The call forward icon above the primary phone number:

• The call forwarding target number in the status line.

Press CFwdALL and enter extension 3620, the ext for voicemail

for Cisco phones.