Cisco 7941G - Unified IP Phone VoIP Instrukcja obsługi telefonu - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja obsługi telefonu dla Telefon IP Cisco 7941G - Unified IP Phone VoIP. Cisco 7941G - Unified IP Phone VoIP 30 stron. Unified communications manager 9.0 (sccp and sip)
Również dla Cisco 7941G - Unified IP Phone VoIP: Podręcznik użytkownika (21 strony), Podręcznik użytkownika (25 strony), Arkusz danych (7 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (4 strony), Podręcznik użytkownika (4 strony), Podręcznik użytkownika (13 strony), Podręcznik administracyjny (12 strony), Podręcznik użytkownika (13 strony), Podręcznik użytkownika (13 strony), Podręcznik użytkownika (6 strony), Podręcznik administracyjny (16 strony), Rozwiązywanie problemów i konserwacja (27 strony)

Drukuj stronę
Cisco 7941G - Unified IP Phone VoIP Instrukcja obsługi telefonu
If you want to...
• Create a conference by
calling participants
• Add new participants to
an existing conference
Create a conference by
joining two or more existing
calls
Participate in a conference
View a list of conference
participants
Get an updated list of
conference participants
See who started the
conference
Remove any conference
participant (conference
initiators only)
Drop the last party added to
the conference (conference
initiators only)
End your participation in a
standard conference
Tips
•
Calls must be on the same line before you can add them to a conference. If calls are on
different lines, transfer them to a single line before using Confrn or Join.
•
If you exit a conference after creating it, the call will continue unless you remove each
participant before hanging up.
Then...
1.
From a connected call, press Confrn. (You may need to press
the more softkey to see Confrn.)
2.
Enter the participant's phone number.
3.
Wait for the call to connect.
4.
Press Confrn again to add the participant to your call.
5.
Repeat to add additional participants.
Note Non-initiators of a conference cannot add or remove
participants.
1.
Make sure that you have two or more calls on a single line.
2.
Highlight a call that you want to add to the conference.
3.
Press Select. The selected call displays this icon
4.
Repeat this process for each call that you want to add.
5.
From one of the selected calls, press Join. (You may need to
press the more softkey to see Join.)
Note
The active call is automatically selected.
Answer the phone when it rings.
1.
Highlight an active conference.
2.
Press ConfList.
Participants are listed by name or number (or unknown if the caller
was in incoming call from off campus) in the order in which they
join the conference with the most recent additions at the top.
While viewing the conference list, press Update.
While viewing the conference list, locate the person listed at the
bottom of the list with an asterisk (*) next to the name.
1.
While viewing the conference list, highlight a participant's
name or phone number.
2.
Press Remove.
Press RmLstC.
Hang up or press EndCall.
15
.