Siemens SITRANS L Series 사용 설명서 - 페이지 9

{카테고리_이름} Siemens SITRANS L Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SITRANS L Series 33 페이지. Capacitance transmitters
Siemens SITRANS L Series에 대해서도 마찬가지입니다: 간결한 사용 설명서 (45 페이지), 사용 설명서 (50 페이지), 사용 설명서 (44 페이지)

페이지 인쇄

Installing/mounting

Note

• Installation shall be performed by qualified personnel and in accordance with local

governing regulations.

• For heavy material, only top mounting of paddle switch is recommended.

• Compact SITRANS LPS200 is recommended for side mounting on bins for low or

intermediate levels.

• For SITRANS LPS200 Cable extension, the maximum pull force of the rope must not

exceed 4 kN (28 kN with reinforced option).

• When installing LPS200 with rigid extension kit, ensure product is top mounted and never

side or angle mounted.

This product is designated as a Pressure Accessory per Directive 97/23/EC and is not

intended for use as a safety device.

Improper installation may result in loss of process pressure.

The device is normally mounted into the vessel top (full detector) or through the tank wall at

the detection level (full, demand or empty detector). The device can be installed through a

standard 1¼" NPT or 1½" BSPT pipe coupling, depending on the chosen process thread.

SITRANS LPS200

Operating Instructions, 04/2019, A5E34210883-AB

WARNING