Siemens SITRANS L Series Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Переключатель Siemens SITRANS L Series. Siemens SITRANS L Series 33 страницы. Capacitance transmitters
Также для Siemens SITRANS L Series: Компактная инструкция по эксплуатации (45 страниц), Руководство по эксплуатации (50 страниц), Руководство по эксплуатации (44 страниц)

Installing/mounting

Note

• Installation shall be performed by qualified personnel and in accordance with local

governing regulations.

• For heavy material, only top mounting of paddle switch is recommended.

• Compact SITRANS LPS200 is recommended for side mounting on bins for low or

intermediate levels.

• For SITRANS LPS200 Cable extension, the maximum pull force of the rope must not

exceed 4 kN (28 kN with reinforced option).

• When installing LPS200 with rigid extension kit, ensure product is top mounted and never

side or angle mounted.

This product is designated as a Pressure Accessory per Directive 97/23/EC and is not

intended for use as a safety device.

Improper installation may result in loss of process pressure.

The device is normally mounted into the vessel top (full detector) or through the tank wall at

the detection level (full, demand or empty detector). The device can be installed through a

standard 1¼" NPT or 1½" BSPT pipe coupling, depending on the chosen process thread.

SITRANS LPS200

Operating Instructions, 04/2019, A5E34210883-AB

WARNING