Epson BrightLink 450Wi - Interactive Projector 여기에서 시작하기 매뉴얼 - 페이지 5

{카테고리_이름} Epson BrightLink 450Wi - Interactive Projector에 대한 여기에서 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 450Wi - Interactive Projector 6 페이지. Remote control information
Epson BrightLink 450Wi - Interactive Projector에 대해서도 마찬가지입니다: 브로셔 및 사양 (18 페이지), 설치 (5 페이지), 마운팅 템플릿 (1 페이지), 치수 도면 (2 페이지), 마운팅 템플릿 (5 페이지), 사용자 설명서 (25 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용 (4 페이지), 브로셔 및 사양 (18 페이지), 설치 핸드북 (10 페이지)

페이지 인쇄
Epson BrightLink 450Wi - Interactive Projector 여기에서 시작하기 매뉴얼
4
Calibrate Your System
Calibration coordinates the positioning of the pen with
the location of your cursor. You can use either pen, and
you only have to calibrate once.
1
Do one of the following:
•
Windows: click the
tray on your taskbar (lower right corner of
your screen), then select Calibrate (Normal).
•
Mac OS X: click the
select Calibration from the menu bar at
the top of the screen, then select Calibrate
(Normal).
Note: If the pen icon appears with a red X
you won't be able to calibrate. Make sure the
projector is powered on and the USB cable is
connected to your computer.
2
After you read the following message, click OK.
Note: Advanced calibration is recommended
only if you are projecting highly detailed images.
pen icon in the system
pen icon in the Dock,
,
3
Wait a few moments for the fl ashing green circle
to appear. Use the interactive pen to touch each
fl ashing green circle as it appears. Continue until
all the circles stop fl ashing and turn black.
•
Touch the center of each circle, and make
sure you are not casting a shadow on the
pen.
•
If you make a mistake, or if too many circles
appear at the same time, press Esc on your
computer keyboard and restart calibration.
Tip: You only need to recalibrate if you change
computers, or if you notice that the pen position
is no longer the same as your cursor.
Congratulations! When you fi nish calibration, you're
ready to explore your software options, as described
on the next page.