Epson BrightLink 450Wi - Interactive Projector 설치 핸드북 - 페이지 7

{카테고리_이름} Epson BrightLink 450Wi - Interactive Projector에 대한 설치 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 450Wi - Interactive Projector 10 페이지. Remote control information
Epson BrightLink 450Wi - Interactive Projector에 대해서도 마찬가지입니다: 여기에서 시작하기 매뉴얼 (6 페이지), 브로셔 및 사양 (18 페이지), 설치 (5 페이지), 마운팅 템플릿 (1 페이지), 치수 도면 (2 페이지), 마운팅 템플릿 (5 페이지), 사용자 설명서 (25 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용 (4 페이지), 브로셔 및 사양 (18 페이지)

페이지 인쇄
Epson BrightLink 450Wi - Interactive Projector 설치 핸드북
Epson BrightLink 450Wi / 455Wi
note
You can project .JPG les in
resolutions up to
4608 × 3072, with pixel
counts incrementing in
multiples of 8.
If a .JPG le is highly
compressed, your projector
may not be able to display it
correctly. The projector can't
display progressive or
CMYK .JPG les.
You cannot project movie
les using the Slideshow
feature.
Customizing the Pointer Tool
You can change the appearance of the pointer by choosing from three
alternative shapes.
1. Press the
button on the remote control, highlight the
Menu
menu, highlight
Settings
can select one of the pointer shapes shown at the left.
2. Select the shape you want and press
3. Press
to exit from the menu system.
Menu

Presenting a Slideshow

You can use your projector's Slideshow feature whenever you connect
a USB device that contains image les having a .JPG lename
extension. This lets you quickly and easily display individual images,
or start a slideshow of all the images in a folder. You can control your
slideshow using the projector remote control.
For an instant PowerPoint presentation, convert your PowerPoint
slides to individual .JPG les (save as *.jpg) and store them in a folder.
Copy that folder to a USB ash memory drive (thumb drive), or other
USB device. Then connect the device to the projector and begin your
presentation.
You can switch the display from the device displaying the slideshow to
another source using the
source buttons on the remote control. To return to the Slideshow
source, press
Source Search
button.
USB
Starting a Slideshow
1. Connect a USB device to the projector's
port.
2. If you are connected to another image source, press the
button on the remote control to go to the Slideshow program.
, and press
Pointer Shape
.
Enter
button or one of the speci c
Source Search
and select
, or simply press the
USB
TypeA
INSTALLATION HANDBOOK
Remote Control Information
. You
Enter
( at) USB
USB
7