Cisco 7945 Series 사용자 설명서

{카테고리_이름} Cisco 7945 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7945 Series 2 페이지. Ip phone and voice mail
Cisco 7945 Series에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (8 페이지), 빠른 참조 매뉴얼 (6 페이지), 빠른 사용 설명서 (2 페이지), 사용자 설명서 (3 페이지), 사용자 설명서 (2 페이지), 빠른 참조 매뉴얼 (8 페이지), 사용자 교육 매뉴얼 (2 페이지), 사용자 설명서 (6 페이지), 빠른 시작 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (30 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 참조 (5 페이지), 설치 매뉴얼 (1 페이지), 빠른 참조 매뉴얼 (3 페이지), 사용자 설명서 (2 페이지), 빠른 참조 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 지침 (3 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (5 페이지), 시작하기 (2 페이지)

Cisco 7945 Series 사용자 설명서
Advanced Telephone Tasks
Call transfer:
During a call press the Transfer soft key. This places the call on hold.
Dial the number or office extension to which you want to transfer the call.
When it rings on the other end, press Transfer again. Or, when the party answers, an-
nounce the call and then press Transfer. If the answering party does not want the call
press End Call then press Resume to return to the original caller.
Forwarding Calls:
Press the CFwdAll soft key. You should hear two beeps.
Enter the number to which you want to forward all of your calls, exactly as you would if
you were placing a call to that number. (After you enter the number, an animated phone
icon with a flashing right arrow appears in the upper-right corner of the LCD screen.
The LCD screen also displays a message confirming the number or extension to which
your calls are being forwarded).
To cancel call forwarding, press the CFwdAll soft key.
Placing a Conference Call:
During a call, press the More soft key and then the Confrn soft key. Doing so automati-
cally activates a new line and puts the first party on hold.
Place a call to another number or extension.
When the call connects, press Confrn again to add the new party to the conference call.
Repeat these steps to add parties to the conference call.
Guide to the Cisco 7945 IP Telephone