Cisco 7961 빠른 시작 매뉴얼 - 페이지 9

{카테고리_이름} Cisco 7961에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7961 21 페이지. Multi-line ip phones
Cisco 7961에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (6 페이지), 빠른 시작 매뉴얼 (6 페이지), 사용자 설명서 (17 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (4 페이지), 빠른 참조 매뉴얼 (4 페이지), 설정 (11 페이지), 빠른 참조 매뉴얼 (1 페이지), 사용자 설명서 (2 페이지), 사용자 설명서 (2 페이지), 사용자 설명서 (2 페이지), 사용 설명서 (3 페이지), 편지 (2 페이지), 참조 매뉴얼 (3 페이지), 빠른 참조 사용 설명서 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Forward All Calls

Call Forwarding allows you to redirect all incoming calls from your Cisco IP Phone to another number.

Step 1)

Press the CFwdALL soft key (you will hear two beeps).

Step 2)

Dial the 4-digit extension to which all calls will be forwarded, OR

Step 3)

Dial the external number to which all calls will be forwarded (e.g., your cell phone). Dial the

number exactly as you would normally dial it if you were placing a call.

Note: After you enter the number, an animated phone icon with a flashing right allow appears in the

upper-right corner of the LCD screen. The LCD also displays a message confirming the number

or extension to which your calls are being forwarded.

Cancel Forward All Calls

Step 1)

Press the CfwdAll soft key (you will hear two beeps).

Note:

The flashing right arrow on the LCD display will disappear indicating that Call Forwarding has

been deactivated.

Place a Call on Hold

Step 1)

While on the call, press the Hold soft key.

Step 2)

To return to a call, press the Resume soft key.

Step 3)

If multiple calls are on hold, use the SCROLL button to select the desired call then press the

Resume soft key.

Placing Conference Calls

There are two ways to create a conference call. You can either initiate a conference call directly using

the Confrn soft key option, or you can initiate a conference call while multiple calls are in progress,

adding all parties (up to a maximum of four) to the conference call.

To initiate a conference call:

Step 1)

Press the more soft key and then press the Confrn soft key (this will automatically select a

new line and place the other party on hold).

Step 2)

Dial the 4-digit extension or 3 + (local or long distance number).

Step 3)

When the party answers, press the Confrn soft key again and the party will be added to the

conference call.

Step 4)

Repeat steps 1 through 3 to add additional parties to the conference call. A maximum of four

people can be in one conference call (including you).

To initiate a conference call while multiple calls are in progress:

Step 1)

Highlight a call using the SCROLL key.

Step 2)

Press the more soft key twice.

Step 3)

Press the Join soft key. That call will be placed on hold while you connect another party into

the conference call.

Repeat steps 1 – 3 until all the parties you want to include in the conference call have been

Step 4)

added (maximum of four parties, including yourself).

MISSOURI S&T Information Technology

Quick Start Guide: Cisco 7941/7961 IP Telephone – 9