Cisco 7962G - Unified IP Phone VoIP 관리 매뉴얼 - 페이지 5

{카테고리_이름} Cisco 7962G - Unified IP Phone VoIP에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7962G - Unified IP Phone VoIP 16 페이지. Unified communications manager 9.0 (sccp and sip)
Cisco 7962G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (23 페이지), 데이터시트 (5 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (4 페이지), 사양 (5 페이지), 관리 매뉴얼 (12 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (12 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (6 페이지), 문제 해결 및 유지 관리 (27 페이지)

Cisco 7962G - Unified IP Phone VoIP 관리 매뉴얼
Cisco Unified IP Phones Installation
The Cisco Unified IP Phones support wideband headsets.
Note
Audio Quality
Beyond the physical, mechanical and technical performance, the audio portion of a headset must sound good
to the user and to the party on the far end. Sound quality is subjective and Cisco cannot guarantee the
performance of any headsets. However, a variety of headsets from leading headset manufacturers have been
reported to perform well with Cisco Unified IP Phones.
For additional information, see the
Cisco.com.
Headset Connection
To connect a wired headset to the Cisco Unified IP Phone, plug it into the Headset port on the back of the
phone. Press the Headset button on the phone to place and answer calls using the headset.
You can use the wired headset with all of the features on the Cisco Unified IP Phone, including the Volume
and Mute buttons. Use these buttons to adjust the ear piece volume and to mute the speech path from the
headset microphone.
See the wireless headset documentation for information about connecting the headset and using the features.
Disable Headset
You can disable the headset by using Cisco Unified Communications Manager Administration.
To disable the headset, perform the following steps:
Procedure
Step 1
Choose Device > Phone and locate the phone you want to modify.
Step 2
In the Phone Configuration window, check the Disable Speakerphone and Headset check box.
Step 3
Click Apply.
Wireless Headset
By default, the Wireless Headset Hookswitch Control option is disabled. You can enable the option in the
Cisco Unified Communications Manager Administration application.
See the wireless headset documentation for information about connecting the headset and using the features.
Headsets for Cisco Unified IP Phones and Desktop Clients
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
Headset
page on
5