Cisco 8832 사용자 설명서 - 페이지 10

{카테고리_이름} Cisco 8832에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8832 20 페이지. Masergy ip conference phone
Cisco 8832에 대해서도 마찬가지입니다: 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (30 페이지), 설치 매뉴얼 (39 페이지), 빠른 시작 매뉴얼 (16 페이지), 유지 관리 매뉴얼 (9 페이지), 빠른 시작 (2 페이지), 설정 (14 페이지), 빠른 시작 매뉴얼 (2 페이지), 재구성 매뉴얼 (2 페이지), 빠른 시작 (2 페이지), 매뉴얼 (30 페이지)

View the Network Status

Procedure

Step 1 Press Settings.

Step 2 Select Status > Network Status.

You can view the following information:

Procedure

Step 1 Press Settings.

Step 2 Select Status > Phone Status > Phone Status.

You can view the following information:

View the Status Messages on the Phone

Procedure

Step 1 Press Settings

Step 2 Select Status > Status messages.

You can view a log of the various phone statuses since provisioning was last done.

Status messages reflect UTC time and are not affected by the timezone settings on the phone.

Note:

Step 3 Press Back.

Procedure

Step 1 Press Settings.

Step 2 Select Status > Phone status > Line status.

You can view the status of each line on the phone.

View 802.1X Transaction Status

10 |

P a g e

• Network type—Indicates the type of Local Area Network (LAN) connection that the phone

uses.

• Network status—Indicates if the phone is connected to a network.

• IPv4 status—IP address of the phone. You can see information on IP address,

Addressing type, IP status, Subnet mask, Default router, Domain Name Server (DNS) 1,

DNS 2 of the phone.

• IPv6 status —IP address of the phone. You can see information on IP address, Addressing

type, IP status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.

• VLAN ID—VLAN ID of the phone.

• MAC address—Unique Media Access Control (MAC) address of the phone.

• Host name—Displays the current host name assigned to the phone.

• Domain—Displays the network domain name of the phone. Default: cisco.com

• Switch port link—Status of the switch port.

• Switch port config—Indicates speed and duplex of the network port.

• Elapsed time—Total time elapsed since the last reboot of the system

• Tx (Packets)—Transmitted packets from the phone.

• Rx (Packets)—Received packets from the phone.

Cisco IP Phone 8832 Series User Guide