Cisco 8832 Kullanıcı Kılavuzu - Sayfa 10

IP Telefon Cisco 8832 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco 8832 20 sayfaları. Masergy ip conference phone
Ayrıca Cisco 8832 için: Ürün Yazılımı Geçişi Ana Kılavuzu (31 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Manuel (30 sayfalar), Kurulum Kılavuzu (39 sayfalar), Hızlı Başlangıç Kılavuzu (16 sayfalar), Bakım Kılavuzu (9 sayfalar), Hızlı Başlangıç (2 sayfalar), Ayarlar (14 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Yeniden Yapılandırma Kılavuzu (2 sayfalar), Hızlı Başlangıç (2 sayfalar), Manuel (30 sayfalar)

View the Network Status

Procedure

Step 1 Press Settings.

Step 2 Select Status > Network Status.

You can view the following information:

Procedure

Step 1 Press Settings.

Step 2 Select Status > Phone Status > Phone Status.

You can view the following information:

View the Status Messages on the Phone

Procedure

Step 1 Press Settings

Step 2 Select Status > Status messages.

You can view a log of the various phone statuses since provisioning was last done.

Status messages reflect UTC time and are not affected by the timezone settings on the phone.

Note:

Step 3 Press Back.

Procedure

Step 1 Press Settings.

Step 2 Select Status > Phone status > Line status.

You can view the status of each line on the phone.

View 802.1X Transaction Status

10 |

P a g e

• Network type—Indicates the type of Local Area Network (LAN) connection that the phone

uses.

• Network status—Indicates if the phone is connected to a network.

• IPv4 status—IP address of the phone. You can see information on IP address,

Addressing type, IP status, Subnet mask, Default router, Domain Name Server (DNS) 1,

DNS 2 of the phone.

• IPv6 status —IP address of the phone. You can see information on IP address, Addressing

type, IP status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.

• VLAN ID—VLAN ID of the phone.

• MAC address—Unique Media Access Control (MAC) address of the phone.

• Host name—Displays the current host name assigned to the phone.

• Domain—Displays the network domain name of the phone. Default: cisco.com

• Switch port link—Status of the switch port.

• Switch port config—Indicates speed and duplex of the network port.

• Elapsed time—Total time elapsed since the last reboot of the system

• Tx (Packets)—Transmitted packets from the phone.

• Rx (Packets)—Received packets from the phone.

Cisco IP Phone 8832 Series User Guide