Cisco 8832 매뉴얼 - 페이지 23

{카테고리_이름} Cisco 8832에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8832 30 페이지. Masergy ip conference phone
Cisco 8832에 대해서도 마찬가지입니다: 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 사용자 설명서 (20 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (30 페이지), 설치 매뉴얼 (39 페이지), 빠른 시작 매뉴얼 (16 페이지), 유지 관리 매뉴얼 (9 페이지), 빠른 시작 (2 페이지), 설정 (14 페이지), 빠른 시작 매뉴얼 (2 페이지), 재구성 매뉴얼 (2 페이지), 빠른 시작 (2 페이지)

Cisco 8832 매뉴얼
Your Phone
Find Information About Your Phone
Your administrator may ask for information about your phone. This information uniquely identifies the phone
for troubleshooting purposes.
The phone contains all unique device identifier (UDI) information. The UDI is composed of three data elements
associated with the phone. The data elements are:
• Product Identifier (PID)
• Version Identifier (VID)
• Serial Number (SN)
You can also find the information about your phone by going to Info > Status > Product Information on
the phone web interface.
Procedure
Step 1
Press Settings.
Step 2
Select Status > Product Information.
You can view the following information:
Product name— Name that represents the Cisco IP Phone.
Serial number— Serial number of the Cisco IP Phone.
MAC address—Hardware address of the Cisco IP Phone.
Software version—Version number of the Cisco IP Phone firmware.
Configuration version—Version number of the Cisco IP Phone configuration. This information shows when
your administrator has enabled it.
Hardware version—Version number of the Cisco IP Phone hardware.
VID—Version ID of the Cisco IP Phone.
Certificate—Status of the client certificate, which authenticates the Cisco IP Phone for use in the ITSP
network. This field indicates if the client certificate is properly installed in the phone.
Customization—For an RC unit, this field indicates whether the unit has been customized or not. Pending
indicates a new RC unit that is ready for provisioning. If the unit has already retrieved its customized profile,
this field displays the Customization state as Acquired.
Step 3
Press Back to return to the Applications screen.
View the Customization State on the Phone
After the RC download from the EDOS server completes, you can view the customization state of a phone
on the screen.
Here are the descriptions of the remote customization states:
• Open—The phone has booted for the first time and is not configured.
Find Information About Your Phone
Your Phone
23