Cisco 8832 Manuel - Sayfa 23

IP Telefon Cisco 8832 için çevrimiçi göz atın veya pdf Manuel indirin. Cisco 8832 30 sayfaları. Masergy ip conference phone
Ayrıca Cisco 8832 için: Ürün Yazılımı Geçişi Ana Kılavuzu (31 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Manuel (30 sayfalar), Kurulum Kılavuzu (39 sayfalar), Hızlı Başlangıç Kılavuzu (16 sayfalar), Bakım Kılavuzu (9 sayfalar), Hızlı Başlangıç (2 sayfalar), Ayarlar (14 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Yeniden Yapılandırma Kılavuzu (2 sayfalar), Hızlı Başlangıç (2 sayfalar)

Your Phone

Find Information About Your Phone

Your administrator may ask for information about your phone. This information uniquely identifies the phone

for troubleshooting purposes.

The phone contains all unique device identifier (UDI) information. The UDI is composed of three data elements

associated with the phone. The data elements are:

• Product Identifier (PID)

• Version Identifier (VID)

• Serial Number (SN)

You can also find the information about your phone by going to Info > Status > Product Information on

the phone web interface.

Procedure

Step 1

Press Settings.

Step 2

Select Status > Product Information.

You can view the following information:

Product name— Name that represents the Cisco IP Phone.

Serial number— Serial number of the Cisco IP Phone.

MAC address—Hardware address of the Cisco IP Phone.

Software version—Version number of the Cisco IP Phone firmware.

Configuration version—Version number of the Cisco IP Phone configuration. This information shows when

your administrator has enabled it.

Hardware version—Version number of the Cisco IP Phone hardware.

VID—Version ID of the Cisco IP Phone.

Certificate—Status of the client certificate, which authenticates the Cisco IP Phone for use in the ITSP

network. This field indicates if the client certificate is properly installed in the phone.

Customization—For an RC unit, this field indicates whether the unit has been customized or not. Pending

indicates a new RC unit that is ready for provisioning. If the unit has already retrieved its customized profile,

this field displays the Customization state as Acquired.

Step 3

Press Back to return to the Applications screen.

View the Customization State on the Phone

After the RC download from the EDOS server completes, you can view the customization state of a phone

on the screen.

Here are the descriptions of the remote customization states:

• Open—The phone has booted for the first time and is not configured.

Find Information About Your Phone

Your Phone