ACD GRUPPE F160 간략한 개요 - 페이지 10
{카테고리_이름} ACD GRUPPE F160에 대한 간략한 개요을 온라인으로 검색하거나 PDF를 다운로드하세요. ACD GRUPPE F160 16 페이지. Vehicle terminal
페이지 인쇄3.2.4 Pin Assignment PS/2 Jack: Mini-Din (6-pole)
Usually older keyboards or scanners which dispose of this connection
are connected at the PS/2 interface.
6
2
Figure 10: PS/2
Pin no. Description
1
DATA
2
3
GND
4
+5V
5
CLK
6
Table 4: Pin Assignment PS/2 Jack
*) The maximum power consumption should be observed, see Section 3.2.8.
3.2.5 Ethernet (LAN)
The LAN or Ethernet interface is used for the connection of the devices via cable. At these interfaces you
can connect a commercial ethernet cable (which is also called patch cable).
Standard configuration of the RJ45 according to the ethernet standard IEEE 802.3
LED: green: network connection
LED yellow: data exchange via Ethernet (sending or receiving) is taking place.
Figure 11: LAN
MFT920_F160_Fusion_Summit_Brief_Overview_FCC_V1.50_en.doc
Function
PS/2 Data signal
Incoming and Outgoing
data
not assigned
COMMON
GND-PS/2
Voltage output
*)
PS/2 Clock signal
Outgoing Clock
not assigned
10 / 16